ROC INC - Metal Wall and Roof Systems

(717) 823-6492

Ribbed Metal Wall and Roof Panels

Here you will find drawings, specifications, descriptions and PDF documents for Architectural Roof Panels from ROC INC.

Panel Detail

T-Rib

Description

The T-Rib panel shall have a width of 12", 14", 16", or 18" wide. Seams shall be 2½" high with a ½" top flange angled at 90 degrees from the seam to facilitate the seaming of the panel and cap. The panels shall have 1/16" x 1" stiffening ribs in the pan of the panel. Roof panels shall use a one-piece roof clip allowing for thermal movement of the panel system. The panel shall have a factory applied mastic and be mechanically seamed with a field operated electric seaming machine provided by the manufacturer. The panel system shall be as a true standing seam shape requiring no trapezoidal foam closures, plugs, or fillers at eaves. The maximum cap length shall be 30'.

Specifications

• A 21/2" high rib panel with excellent design flexibility
• Ease of installation for difficult hip, ridge, and valley conditions
• Mechanically seamed cap strip with factory- applied weatherstripping assures a weather-tight seam
• One-piece concealed clip allows for unlimited thermal movement
• Panels can be tapered
• Symmetrical design allows panels to be installed in either direction
• Multiple UL90 ratings for steel panels
• Can be installed over open framing or solid substrate
• Minimum roof slope: 1/2:12
• Standard widths: 16" and 18"

PDF

 

Back to Top

Panel Detail

Seam Rib

Panel Specifications

• High profile mechanical seamed standing seam panel
• Designed for low or high slope industrial applications
• Ideal for complex roof plans on Pre-Engineered Metal Buildings and Mini Storage applications where valley conditions challenge trapezoidal panels
• Wide seam on centers speed panel installation
• Panel leg is seamed to a 45 degree angle locking to the panel clip
• Factory applied sealant standard
• Three pronounced stiffening ribs add rigidity to panel pan
• Concealed two piece clip allows for thermal movement
• Normally installed over open framed structures
• Panel can be reverse run and used as a Liner Panel
• 24 gauge and 22 gauge steel are available

Back to Top

Panel Detail

Mighti-Rib

Description

The Mighti-Rib PBR panel shall have a coverage of 36". Panels shall be directly fastened to the substrate. The panel shall have an overlapping sidelap feature.

Specifications

• Excellent for commercial and industrial applications
• 26 gauge full hard (80 ksi) steel
• Diaphragm capacity per ICBO Evaluation Report
• Standard lengths: 6'-45'
• PBR panels require a minimum slope of 1:12
• UL90 rating for PBR panels when attached to steel purlins
• Available unpainted or finished with high-performance Super Alurite® paint system

PDF

 

Back to Top

Panel Detail

Hefti-Rib

Description

A classic design with 7.2" rib spacing. Excellent strength and spanning capability. Excellent for both wall and roof applications.

Specifications

• Available in .032" and .040" aluminum
• Available in 24, 22, 20 and 18 gauge steel
• Panels can be curved
• Minimum slope for roofing applications is 2:12
• Standard lengths: 6'-45' • 36" wide weather coverage
• Diaphragm capacity per ICBO Evaluation Report

Back to Top

Detail

Ultra-Rib

Description

Ultra-Rib structural exposed fastener roof and wall system.

Specifications

• 26 gauge industrial quality steel or AZ50 (painted) and AZ50 (unpainted) coatings
• Full 36" coverage
• Purlin bearing leg
• Minimum roof pitch 1:12
• All orders custom cut to lengths up to 40'
• Perfect for commercial and industrial applications
• Aluminum available on an inquiry basis

 

PDF

Back to Top

Detail

Deep Rib II

Description

The Deep Rib II panel shall have a coverage of 30" for steel and 40" for aluminum". Rib height shall be 2". Panels shall be directly fastened to the substrate. The panel shall have a overlapping sidelap feature.

Specifications

• Can be used for both wall and roof applications
• Available in 22 and 18 gauge steel
• Available in .032", .040" and .050" aluminum (43-7/8" panel with 40" coverage)

PDF

Back to Top

Panel Detail

Deep Rib IV

Description.

A bold rib design, perfect for horizontal and vertical applications. Large 4" deep ribs provide excellent strength and spanning capacity. Can be used inverted for roof applications. Minimum roof slope: 1:12. Excellent for applications with large spans between structural framing members. Standard lengths: 6'-45'

Specifications

• The Deep Rib IV panel shall have a coverage of 24". Rib height shall be 4".
• Panels shall be directly fastened to the substrate.
• The panel shall have a overlapping sidelap feature.

PDF

Back to Top

Back to Top

 

Page Menu Items

 

Home | About ROC INC | Metal Wall and Roof Systems | Thin Panel Metal Wall Products | Thin Panel Metal Roof Products
Thin Panel Metal Wall and Roof Types
| Thin Panel Metal Wall and Roof Materials | Custom Fabrication | Sitemap | Contact ROC INC
2016 ROC INC All Rights Reserved
Web Design by Kendell Communication Service