ROC INC - Metal Wall and Roof Systems

(717) 823-6492

Exposed Fastener Wall and Roof Panels

Here you will find drawings, specifications, descriptions and PDF documents for Exposed Fastener Wall and Roof Panels from ROC INC.

Detail

Hefti-Rib

Description

A classic design with 7.2" rib spacing. Excellent strength and spanning capability. Excellent for both wall and roof applications.

Specifications

• Available in .032" and .040" aluminum
• Available in 24, 22, 20 and 18 gauge steel
• Panels can be curved
• Minimum slope for roofing applications is 2:12
• Standard lengths: 6'-45' • 36" wide weather coverage
• Diaphragm capacity per ICBO Evaluation Report

PDF

Back to Top

Panel Detail

Ultra-Rib

Description

Ultra-Rib structural exposed fastener roof and wall system.

Specifications

• 26 gauge industrial quality steel or AZ50 (painted) and AZ50 (unpainted) coatings
• Full 36" coverage
• Purlin bearing leg
• Minimum roof pitch 1:12
• All orders custom cut to lengths up to 40'
• Perfect for commercial and industrial applications
• Aluminum available on an inquiry basis

PDF Files - Ultra-Rib, Ultra-Rib I

Back to Top

Panel Detail

V-Beam

Description

The V-Beam panel shall have a coverage of 32" for steel and 42 aluminum. Rib height shall be 1¾". Panels shall be directly fastened to the substrate. The panel shall have a overlapping sidelap feature.

Specifications

• Minimum slope for roofing applications is 2:12
• Available in .040" and .050" aluminum
• Excellent strength and spanning capability
• Diaphragm capacity per ICBO Evaluation Report
• Standard lengths: 6'-45'

PDF

 

Back to Top

Panel Detail

Corrugated

Description

Factory formed, prefinished, lappable, exposed fastener, structural ribbed metal roof and wall system, that has been pretested and certified by manufacturer to comply with specified requirements under installed conditions.

Specifications

4.2 C O R R U G AT E D

• Now up to 42' lengths
• Comes in all materials
• Made in galvanized and (T304) Stainless Steel
• Standard stocking sizes of 8', 10', & 12'
• 4.2" offered in wide variety of painted colors
• Asbestos replacement panel.

7 / 8 " C O R R U G AT E D
• Bolder look
• Great for exterior and interior uses
• Can be perforated for acoustical applications
• Standard 13.3% open area (1/8" diameter holes on .325" staggered centers)
• May be used in vertical or horizontal orientation
• Mitered corners are available
• Available curved
• .032", .040" and .050" aluminum are available in various widths
• 26, 24, 22, 20 and 18 gauge steel are available in various widths

1 / 2 " C O R R U G AT E D
• An economical and versatile wall or roof panel
• Can be perforated for acoustical applications
• Standard 13.3% open area (1/8" diameter holes on .325" staggered centers)
• May be used in vertical or horizontal orientation
• Mitered corners are available
• Available curved
• Class 4 impact rating
• Class A fire rating
• .032", .040" and .050" aluminum are available in various widths
• 26, 24, 22, 20 and 18 gauge steel are available in various widths

 

PDF

 

Back to Top

Detail

Deep Rib II

Description

The Deep Rib II panel shall have a coverage of 30" for steel and 40" for aluminum". Rib height shall be 2". Panels shall be directly fastened to the substrate. The panel shall have a overlapping sidelap feature.

Specifications

• Can be used for both wall and roof applications
• Available in 22 and 18 gauge steel
• Available in .032", .040" and .050" aluminum (43-7/8" panel with 40" coverage)

PDF

 

Back to Top

Panel Detail

Deep Rib IV

Description.

A bold rib design, perfect for horizontal and vertical applications. Large 4" deep ribs provide excellent strength and spanning capacity. Can be used inverted for roof applications. Minimum roof slope: 1:12. Excellent for applications with large spans between structural framing members. Standard lengths: 6'-45'

Specifications

• The Deep Rib IV panel shall have a coverage of 24". Rib height shall be 4".
• Panels shall be directly fastened to the substrate.
• The panel shall have a overlapping sidelap feature.

PDF

 

Back to Top

Panel Detail

Mighti-Rib

Description

The Mighti-Rib PBR panel shall have a coverage of 36". Panels shall be directly fastened to the substrate. The panel shall have an overlapping sidelap feature.

Specifications

• Excellent for commercial and industrial applications
• 26 gauge full hard (80 ksi) steel
• Diaphragm capacity per ICBO Evaluation Report
• Standard lengths: 6'-45'
• PBR panels require a minimum slope of 1:12
• UL90 rating for PBR panels when attached to steel purlins
• Available unpainted or finished with high-performance Super Alurite® paint system

PDF

 

Back to Top

Panel Detail

4" Rib

Description

An industry standard—Ideal for heavy industrial and lagging applications.

Specifications

• Available mill finish, clad or painted in .032", .040" and .050" aluminum • Available in 24, 22 & 20 gauge steel, 32" coverage
• Panels can be curved
• Minimum slope for steel roofing applications is 21/2:12
• Standard lengths: 6'-45'
• 8" Rib available on an inquiry basis
• The allowable loads are based on 1986 AISI and 1986 Aluminum Association specifications.
• The allowable loads are based on stress only.
• The allowable loads for the steel load table may be increased by 1/3 for wind loading. The allowable loads have been increased for the aluminum load tables by 1/3 for wind loading. • The use of steel 4" Rib panels on roof pitches less than 2 1/2":12 (12°) is not recommended.
• The maximum individual panel length for steel 4" Rib on roofs in 32' due to thermal movement considerations.
• The use of aluminum 4" Rib panels on roofs is not recommended.

PDF

 

Back to Top

 

Page Menu Items

 

Home | About ROC INC | Metal Wall and Roof Systems | Thin Panel Metal Wall Products | Thin Panel Metal Roof Products
Thin Panel Metal Wall and Roof Types
| Thin Panel Metal Wall and Roof Materials | Custom Fabrication | Sitemap | Contact ROC INC
2016 ROC INC All Rights Reserved
Web Design by Kendell Communication Service